Oak pond outlet

The pond dam retains water in the ponds. Discharge devices for special-purpose water reservoirs are designed for discharging water in various situations and as needed. You can drain the water at different times and schedules. The oak outlet is a part of the dam.

We place the drain device, such as the oak pond outlet, as low as possible. This makes it easy to drain and drain the entire pond. Water reservoirs larger than 1 million m³ must be equipped with two outlets. The second outlet can also serve as a sampling device, through which you drain the water into the flow under the tank.

The oak outlet consists of a closing element and a water drainage device. According to the design, they are divided into open and pipe. The sluice gate is made of oak boards. The most commonly used type of pipe drain is the aforementioned monk outlet. The oak outlet is constructed of oak wood in the form of a short wooden control boards. These wooden boards are 0.15 – 0.20 m long oak planks. Prior to unwanted handling, they are equipped with a lockable cover. If the tank is not equipped with two outlets, it must have at least one closure that can be used in all conditions in the tank and allow flow control, as well as another closure that can reliably and safely block the outlet inlet in the event of a service cap failure. It is necessary to place sieves before the inlets to the outlet. The pitch of the sieves is given according to the purpose of the pond (e.g. breeding) or depending on the smallest diameter of the outlet.

Oak wood is a material that will, even after being in contact with water, last for many years. Oak wood is one of the very durable woody plants. The oak drain outlet produced by us is made of oak wood according to your exact measurements.